I] Cloth Products : Drill Cloth.
II] Paper products : 150 GSM Paper
III] Abrasive Grain : I] Aluminium Oxide. II] Silicon Carbide. Adhesive & Grain Coating On Cloth/Paper
This process is the heart of the abrasive products. Adhesive coating process to be done on the main coating machine, and after that the grain coating to be done by electro/gravity method on cloth/paper. This process also require mixing plant, steam boiler and phenolic / alkyd resin as adhesive.

The adhesive/grain coated cloth/paper to be curried in certain temperature & time by circulating the hot air. this process must be done in loop (Festoon) form of the cloth/paper this process require Hot air unit as well as Oven with chain conveyer system (Depends upon required capacity of production).

This plant is required for cloth processing process as well as adhesive coating process. It is a mixing of fillers, adhesives, chemicals, at certain temperature & viscosity.

This unit is required for festoon currying purpose.

This Unit is required for Jumbo Currying purpose.

For Paper Product there are no fillers but for the cloth product fillers are filled on the back side. There are two sides of the cloth which are different form each other. One side bears a net of fine lining if seen carefully and this side is called drilled side of the cloth. Drill side is filled with fillers. The other side of the cloth is called the coating side. This process can be done in adhesive coating plant. But if the gray cloth purchases from the market, four processes we have to do that is called cloth processing. The name of the process is bleaching, scouring, sizing, dying etc. This process require mixing plant & steam boiler.

After the festoon currying for strong bonding of abrasive grain the sizing coat (Second coat) to be done on sizing coat machine/oven.

Rewinding

For making the coated abrasive cloth/paper in jumbo roll from this process to be done by rewinding machine.

For Perfection of curing this process to be done in jumbo roll form of coated abrasive cloth/paper.

The coated abrasive cloth/paper to be convert in sheet, belt, disc, flap wheel, etc. Form is called conversion process.

This plant is required for manufacturing phenolic/alkyd resin for quality product maintaining the secrecy of the product.

	Flow process chart for abrasive cloth product.
	Flow process chart for abrasive paper product.
	Block Diagram for mfg. of Coated Abrasive Mops.
	Block Diagram for mfg. of Coated Abrasive Flap Wheels.