Products............

* Coated Abrasive Process Machines *

Marker Coating Machines

Technical Specification :
Capacity : working width 40 inches (available in required width)
Min . width of slit : 25mm & 9mm..
Power : 6.5 Hp.
Drive : D. C. variable speed .
Mode of operation : Manual
Approx. dim. (L.W.H ) : 1500mm x 2400mm x 1500mm .

Features :
• Pneumatic lifting system of roll and resin tray .
• Pneumatic pressure control system for controlling the G.S.M of glue / resin .
• Mechanical up and down fine adjustment for the Counter roll .
• leaner slides for Nip roll and Counter roll .
• Harden and grind hard crome plate Counter roll .
• Synthetic rubber coated Nip roll .
• Detachable resin / glue tray with electrical heating system .
• Micro dial gauge for gap indication Nip and Counter roll .
• Easy removing arrangement for Nip and Counter roll .
• On line detachable smoothing bar system with drive .

Sizer Coating Machines

Technical Specification :

        Capacity - working width 40 inches (available in required width)
        Power - 8.5 HP
        Drive - D.C. variable Speed
        Mode of operation- Semi Auto
        Approx. dim (L.W.H ) -2500mm x 2400mm x 1500mm

Features :

• Hydro Pneumatic Web Aligning unwinding station with electronic tension   control system .
•  Pneumatic lifting system of roll and resin tray .
•  Pneumatic pressure control system for controlling the G.S.M of glue / resin .
•  Mechanical up and down fine adjustment for the Counter roll .
•  leaner slides for Nip roll and Counter roll .
• Harden and grind hardcrome plate Counter roll .
• Synthetic rubber coated Nip roll .
• Detachable resin / glue tray with electrical heating system .
• Micro dial gauge for gap indication Nip and Counter roll .
• Easy removing arrangement for Nip and Counter roll .

Electrostatic Grain Coating Machines

Technical Specification :

Capacity : working width 40 inches (available in required width)
Power : 5.0 Hp.
Drive : D.C. variable Speed.
Mode of operation : Semi auto
Approx. dim. (L.W.H ) : 2400mm x 2200mm x 1500mm .

Features :

• Positive and Negative electrodes.
• H. V. generator.
• Control panel.
• A complete trolley for Electrodes and conveyor system.
• Grain hopper with micro adjustment & drive .
• Feed grain conveyor and excess grain conveyor with drive and belts.
• Online gap control mechanism.

*** Coated Abrasive Conversion Machines ***

Model : JRSM 03

Jumbo Roll Slitting Machines

Technical Specification :
Capacity : working width 1500mm    (available in required width)
Power     : 6.25 Hp
Min . width of slit   : 25mm
Max. No. of slit     : 16 Nos.
Drive      : D.C. variable Speed.
Mode of operation   : Manually
Approx. dim (L.W.H )   : 1750mm x 2500mm x 1325mm

Features :
• Combination of Pneumatic & Mechanical     (For      Fine Adjustment) cutters
• Clutch Electronic .
• D. C. drives with variable speed .
• Synchronizing with unwinding & rewinding     station.
• Hydro Pneumatic Web Aligning unwinding    station   with electronic tension control    system .
• Rewinding shaft on hinges with detachable   couplings.

Model : JRSM 04

Multi slitting Machines

Technical Specification :
Capacity : working width 300mm (available in required width)
Min . width of slit : 25mm & 9mm..
Power : 1 Hp.
Drive : A. C. Fixed speed .
Mode of operation : Manually
Approx. dim. (L.W.H ) : 1200mm x 800mm x 1270mm .

Features :

• Combination of pneumatic & mechanical
• Press cutters - 12 Nos. & cutter holders -12 NOs.
• Clutch mechanical.
• Coreless shaft for rewinding .
• Mechanical unwinding station for web control .
• Pneumatic roll holder for belt tracking up to the 2 mtrs. for Min. 25mm slit &
up to the 1mtr. for min. 9mm slit.

Belt Cutting

Belt Pesting Machines

Technical Specification :
• Maximum working width :300 mm (Available in required width )
• Minimum working Length:440 mm
• Production capacity per shift: 400 Belts of Max. 300 mm Width.
• Maximum applied pressure :30 Tons at 6Kg / Cm2 by Air.
• Lower plate heating facility : Available
• Timer facility for pressure : Available

Features :
• 150 mm x 440 mm size belt can be past .
• Heating Temp. can be control
• Applied pressure can be control.
• Time can be control .
• Upper plate heating available on demand .

Sheet Cutting Machines

Technical Specification

Capacity : Working width 1500mm. (Available in required width)
Min. width of slit 25mm for cloth
Min Width of 9 inches for paper.
Max. Speed : 50 Mtr. / Min. or 550 Rims / Shift
Power :11 HP.
Drive : D.C. Variable Speed.
Mode of Operation : Manually.
Approx. dim. (L.W.M):3000mm x 2500mm x 1500mm.

Features :
• Combination of pneumatic & Mechanical arrangement for cutters .
• Main drive with variable D.C. speed drive synchronized with unwinding & sheet carrying conveyor .
• Hydro pneumatic Web Aligning Unwinding Station with electronic tension control system .
• Sandwich belt conveyor with D.C. Drive for sheet carrying .
• Separate D.C. Drive for sheet cutting knife for adjustment of sheet length .
• Electronic analog sheet counting & stoppage of sheet carrying conveyor with bypass facility will be provided
• Cup cutter facility for paper cutting & pneumatic / mechanical crush cutters for cloth cutting.

*** Buffing & Polishing Machines ***

Rim But joint Grinding Machines

Technical Specification :
No of polishing heads -
• internal head polishing by specially developed Daisy Wheel
• Connect Load -3Hp
• Cycle Time - 20 to 50 Seconds (Adjustable)
• For External Break Area But Welding Joint Polishing of Bicycle & Motorcycle Rims .

*** SPM For Fertiliser Industries ***

Mixer

Sandwich Belt Conveyor

*** Other Products ***

Hot Air Generator

Technical Specification :
Capacity : Capable for 150 C temperature, In the volume of 4m x 5m x 35m.
Power : 2.25 Hp.
Burner capacity : 200 Ltrs. (Italian make ).
Mode of operation : Semi automatic.
Approx. dim. (L.W.H ) : 3000mm x 1500mm x 1500mm .
Temp. rising time :Minimum time for rise the temperature up to 150 C is 4 hrs. (for 4m x 5m x 35m. size of oven)
Diesel consumption : Average diesel consumption 6-10 Ltrs / Hrs.

Features :
• parallel connection can be possible
• Bigger Cap. available
• No need of Chimney
• Wood / Gas Fried also available .
• Used as a dryer
• Low electric consumption

Fermenter

Steam Boiler

Design Features :
• Low Investment.
• Fully Auto Fired.
• Dual Fried Diesel / Wood.
• Minimum Fuel consumption.
• Compact & Efficient .
• Suitable for Minimum Space .
• Low Maintenance .
• No Ecological Disturbance .

Applications :

• Abrasive industries.
• Textile units.
• sugar Factories .
• Other Processing Units .

Technical Specification :

sr. no	Capacity	Type	Chimney	Fire Type	Operating Pressure	Water Storage Tank	Fuel Storage Tank
1	400 Kg./hr.	Smoke tube	20 feet	Diesel / wood	6 Kg / cm	2500 ltrs	200 ltrs
2	300 Kg./hr.	Smoke tube	20 feet	Diesel / wood	6 Kg / cm	2500 ltrs	150 ltrs
3	100 Kg./hr.	Smoke tube	20 feet	Diesel / wood	6 Kg / cm	2500 ltrs	100 ltrs

Sander Disk Coating Plant

Belt Pesting Machine

:: Dealers In ::

•	Abrasive Belts	•	Waterproof Paper
•	Flapwheels & Mops	•	Sand Paper
•	Mounted Point	•	Emery Rolls
•	Grinding Wheels	•

Home / Profile / Products / Coated Abbrasives / Technology / Contact Us / Feedback

*** Coated Abrasive Process Machines ***

* Coated Abrasive Process Machines *